Dismiss this notice
Welcome to the new forums.
These will replace the old wanted sections and allow users to interact with each other and get files they need. Also it will allow for more discussion about codeplugs and hopefully help people get more out of this site. Please share any feedback with us via the contact links on the main page so we can keep improving this site for all.

NOTE: You will have to register with this system as the older user logins are not compatible with the new forums.


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Your Ultimate Look at Sex Dolls Right Now- Read Before You Buy
#1
[center][Image: nfaoxus406adxw2wnv657-1.jpg][/center]

[center]SEE THE BEST SEX DOLL MAINTENANCE ADVICE NOW[/center]

How To Clean And Maintain Your Sex Doll So It Lasts For Years
Here comes the unsexy part of having a doll: maintenance. It's the most important job too, since a doll that gets poor care will end up looking cheap, feeling sticky and wearing out years before her time. It helps that maintenance is not hard. It isn't difficult or costly, and the time it takes is less than most people think. What isn't so good is that neglecting it, or cutting corners, has consequences. Both TPE and silicone are durable, yet neither repairs itself. A set stain is permanent, mould inside becomes a health hazard, and a joint that has loosened won't tighten back up. There's no repair that undoes those things, so the entire game is prevention.

Start With the Aftercare
Let's work through the whole routine carefully, first with the job after each use. Cleaning her is non-negotiable, and it is more than hygiene: it's about how long the material lasts. Being porous, TPE absorbs oils, bacteria and dyes; being non-porous, silicone avoids that, though still needs cleaning so nothing builds up. Whichever the material, the routine is identical:
1. Take out any inserts and wash them on their own
2. Wash the orifices using warm water and mild antibacterial soap
3. Drying sticks dry everything thoroughly (minimum 15-20 minutes)
4. Sprinkle cornstarch or baby powder over the entire outside
5. Store her correctly

Drying and Powdering
Most owners go wrong at step three. Not optional: drying sticks, which are absorbent rods that stay inside for 15-20 minutes. If you skip it you get mould, which is a real problem in porous materials. It starts inside, where you can't see it, and by the time you notice the smell it has already taken hold. Powdering works best with a soft makeup brush, which stops the surface turning tacky and keeps dust from sticking to the skin.

Joints, Tears and Wear
Add a deeper pass once a week. Work her through every pose and notice whether a joint feels stiff or squeaks, and a dab of silicone-based lubricant on the joint bolt will fix it, but never use oil-based lubricants on TPE: they break down the material. Look for small tears or wear, since small tears can be repaired with a TPE repair kit before they get worse, and larger tears require a professional, so don't overlook minor damage: it grows. Prompt catching of a tear means a cheaper, easier fix and less risk of it spreading into a load-bearing area.

Keeping the Wig Fresh
Every week or two, wash the wig with shampoo designed for wigs, not regular hair products, then air-dry it completely before it goes back on. Check for stains too, because even with careful handling, discolouration develops around the thighs, back and buttocks, especially on pale skin where every mark shows. This weekly pass takes about fifteen minutes and catches most problems while they're still cheap to fix.

Replenishing the Material
Make each month the time to go deeper. Oil the TPE: it naturally sheds oil with age, and the material needs replenishing, and a light application of mineral oil made for TPE dolls will keep the material soft and stop cracking, every month or every few months, depending on where you live and how often she's used. If it's hot and dry where you live, you'll oil more often than someone in a cooler, damper climate would. Inspect the skeleton, making sure that joints hold their positions, standing feet bolts are secure where relevant and the internal framework has no stress or wear.

The Rest of the Monthly List
Deep clean the orifices using a more powerful antibacterial solution, stopping bacterial growth, then rinse and dry fully. Inspect her storage setup too, as hanging points shift, new sources of pressure develop, and anything in contact with her that could transfer dye is worth catching early. Record when you oiled, powdered and deep cleaned, and what's overdue never gets lost; neglect is the single biggest cause of accelerated wear.

How the Two Materials Differ
The routine is mostly the same between TPE and silicone, but a few differences matter. TPE is more maintenance-intensive because it's porous, so it needs more careful cleaning, more regular powdering and more oiling, and it also stains more easily, though on the plus side it's softer and warmer. Since silicone is non-porous it's easier, with stains and bacteria much better, no oiling and longer-lasting detail; the cost is that it's firmer, more expensive and can feel less alive. The best of both come with a hybrid, with a TPE body and silicone head: maintenance concentrates where it matters, and the head needs only a wipe.

Don'ts Worth Remembering
Below is the list of mistakes most owners make, so avoid them:
1. Don't use soap, body wash or shampoo meant for people, because they strip oils from the material
2. Don't use alcohol or bleach, as they harm both TPE and silicone
3. Never put her in the shower unless her standing feet have metal bolts
4. Avoid leaving her in direct sunlight, which damages the material and fades wigs
5. Drying is the single most important part of cleaning, so don't skip it
6. TPE joints get silicone-based lubricant only, never oil-based
7. Never test fabrics on her body before you've tested them on a cloth
8. Don't think she needs no upkeep just because you haven't used her

Prepare Her Before Storage
The final point surprises a lot of owners. Whether or not she's used, TPE degrades, so keep oiling and powdering even in storage. Six months of neglect leaves a doll drier and stiffer than one that's been looked after, and that isn't always reversible. If she's going into storage for an extended period, oil her, powder her, and store her out of sunlight and away from heat sources. Bringing her back out means a first clean that takes a bit longer than usual.

Are You Ready for the Time?
Let's be frank about the time involved. The full cleaning routine runs to around 45 minutes (more for a heavy or large doll), and that is not an exaggeration. You might get 20 minutes of fun followed by 45 minutes of cleanup, which is how it is. To halve the cleanup, people start using inserts or buy a doll with fewer orifices; that's the main reason. If that much time is a problem, get a doll with inserts. If you can commit, work it into your routine, and accept it, as maintenance is what keeps her in good shape.

Heavier Means More Work
Weight makes the whole job tougher than it sounds. It's genuinely physical: cleaning a 45kg doll means lifting, turning and moving her repeatedly. A 25kg doll is comfortably doable, cleaned in one sitting with not much strain. When upkeep time and effort matter most, choose the lighter doll and live with the trade-off in presence, because there's no way a heavy doll will clean itself.

Products You Can Trust
There's also the question of what cleaning products you're actually using and whether they're safe. The safe option is mild antibacterial soap in warm water, no scent, no moisturisers and no exfoliants. Buy a pack of ten drying sticks; they're inexpensive, reusable and will last months. Ordinary cornstarch from the supermarket is a fine powder, cheaper than purpose-made baby powder and just as effective. Pick the correct type of mineral oil for TPE (doll suppliers sell it) and never use cooking oil, which turns rancid inside the material and causes a smell you can't get rid of.

A Simple Safety Test
If you doubt a product, use this easy rule of thumb: if you wouldn't put it on your own skin, keep it off the doll. Stay away from TPE with anything containing alcohol, bleach or oil-based ingredients. Scented? Don't use it on silicone, since the scent can linger. The safe fallback is plain water and mild soap, which manufacturers themselves advise for regular cleaning.

Maintenance Calendar
Here's the full routine as a calendar. After each use, wash, dry, powder and store. Weekly checks: joints, damage, stains; plus the wig wash. Monthly jobs: oiling, orifice deep-clean, skeleton inspection and storage check. Every three to six months: full joint, skeleton and feet inspection, worn components replaced, cracking and sagging checked. Once a year, consider replacing the wig, inserts and heavily worn components ahead of failure.

What Separates Ten Years From Eighteen Months
Maintenance is unglamorous, and nobody mentions it when they buy a doll, but it's the difference a doll that lasts ten years from one that lasts eighteen months. Remember: clean, dry, powder, oil, check, repeat. Expect around 45 minutes per session and perhaps ten extra minutes a week. Do it properly and your doll will reward you for it. More info at this The Ultimate Look at Sex Dolls- The Stuff That Matters 15d81ac alongside all Your Ultimate Primer on Sex Dolls- What You Need to Know not forgetting sites such as The Full Look at Sex Dolls Today- Start Here bearing in mind The No-Nonsense Lowdown on Sex Dolls Today- The Truth bearing in mind The Essential Word on Sex Dolls- Start Here and don't forget The Real Guide to Sex Dolls Right Now- No Hype Just Facts and don't forget Your Ultimate Guide to Sex Dolls- No Hype Just Facts together with The Real Rundown of Sex Dolls Right Now- Start Here not to mention A Straight-Up Look at Sex Dolls Today- The Truth and The Full Word on Sex Dolls Right Now- What to Expect. Also check out check this out as well as visit website and his explanation for more.
[center][Image: lwje3h40r9td4hani42wf.jpg][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)