Dismiss this notice
Welcome to the new forums.
These will replace the old wanted sections and allow users to interact with each other and get files they need. Also it will allow for more discussion about codeplugs and hopefully help people get more out of this site. Please share any feedback with us via the contact links on the main page so we can keep improving this site for all.

NOTE: You will have to register with this system as the older user logins are not compatible with the new forums.


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The Only Rundown of Sex Dolls Today- Read Before You Buy
#1
[center][Image: nfaoxus406adxw2wnv657-1.jpg][/center]

[center]CLICK HERE FOR BEST SEX DOLL HAND ADVICE NOW[/center]

Sex Doll Hands Compared: Articulated Vs Wired, And Which Is Best
Ask a new purchaser about the hands and they'll have nothing to say, but within weeks they'll have plenty, none of it decent. Everything looks great on arrival, until the purchaser attempts to pose the hands and finds stiff, floppy or breakage-prone fingers; it's the same every time. This is the top first-time-owner complaint, and one that's totally avoidable with a clear understanding of the two chief types of hands before ordering.

Thin Wire, Soft TPE
The more common option, and the cheaper one, is standard wire hands. The construction is a thin metal wire through each finger, embedded in gentle TPE or silicone, made to bend easily for posing. The soft material around the wire gives a natural look, and the wire itself is thin enough to be adaptable, so the fingers go into a variety of shapes. They're fine on a light doll and perfectly enough when the hands get little use. They're a difficulty, however, on a weighty doll.

Wire Fatigue Explained
The trouble with standard wire hands is a wire that has only a limited lifespan. It snaps after a finite number of bends, leaving a floppy finger that's not easy to fix. The thin wire doesn't need much; continuous pressure from holding a pose, the weight of the doll's arm, or usual handling over time will break it. The wires fail within a few months for some customers, but other customers get a year or two. Whichever it is, failure is inevitable, and the only question is when.

Why Articulated Hands Are the Better Build
The upgrade is articulated hands. Where wire hands use one wire, these use individual stainless steel finger joints with small pivots, allowing bends at multiple points. Much stronger than wire, the joints can hold a pose and keep the material around them free of strain. Expect to pay fifty to a hundred pounds more for articulated hands, depending on the maker, and practically every purchaser will find it worth the upgrade. You get massively better durability and poseability.

Poses That Last
The first benefit is pose-holding. Wire hands sag over time since the wire can't preserve tension, whereas an articulated hand stays where you put it because every joint is designed to hold. As a result she can grip objects, rest a hand on her hip, or hold a photography pose with no drooping fingers. Photographers will count this a huge upside, because the hands are one of the most expressive parts of a pose.

Snapping Risk Dramatically Lower
Durability is the second advantage. Stainless steel joints and pivots designed to last mean articulated hands don't have the same wire fatigue issue. Although the surrounding material can wear over time, the joints are far more tough than wire and a finger is dramatically less likely to snap. Wire hands on a 45kg doll are under continual strain and break faster than on a lighter doll, so on a hefty doll this matters even more.

Crisper Finger Shapes
The third advantage lies in how much more realistic articulated hands look in poses. The wire doesn't support the material properly, so wire hands tend to look marginally rubbery when bent. Crisper finger shapes from articulated hands mean the fingers look more defined and less as if they'd been squashed into position. To anyone who knows what to look for, the difference is clear, and photographs make it especially noticeable.

Advantage Four: The Doll Feels More Complete
The fourth benefit is that articulated hands make the doll feel more complete. Hands are one of the most expressive parts of the body, so a doll with articulated ones can gesture, point, hold and grip in ways that wire-handed dolls merely can't. There's a totally new dimension to posing here, thanks to a doll that can hold objects, interact with props and produce dynamic compositions that wouldn't be possible otherwise. Photographers and roleplay enthusiasts get a significant benefit from this.

Floppy Fingers Cost More in the End
Articulated hands cost more, which is the first drawback. Cost is the sticking point: an additional fifty to a hundred pounds can push the total out of your range when you're buying on a tight budget. On the other hand, the cost of replacing a broken wire hand, or the frustration of dealing with floppy fingers, is usually worse than the upfront cost of articulated hands, so the upgrade is practically always worth it in the long run.

A Minor Trade-Off
A second disadvantage: articulated hands can be somewhat stiffer than wire hands. The joints are designed to hold a pose, which means they resist movement more than wire does. A bit more effort is needed to position the fingers, though that's great for posing, as the hand stays where you put it. Some buyers find this frustrating, especially if wire hands that bend readily are what they're used to. It's a small trade-off that most customers adjust to within a few days.

Reinserting a Popped Joint
In a different way, articulated hands can be somewhat more breakable than wire ones; that's the third drawback. Strong joints notwithstanding, loose connections to the material are possible, and a wrenched finger can see the joint pop out and need to be reinserted. This is worth knowing about before you acquire: less widespread than wire breakage, but it does happen. Handle with care. Support the hand properly when moving it, and leave fingers alone if they don't want to go where you're pushing them.

Do the Hands Look Out of Place?
Articulated hands are frequently a little bigger than wire hands, which is the fourth downside. The fingers can look a bit chunkier because there are additional joints taking up space. The difference is generally slight and goes unnoticed, but smaller dolls can show it, and a petite doll with delicate proportions might not suit articulated hands. Put a question to the vendor: are the articulated hands on that specific doll scaled proportionally? Some makers do it better than others.

Think About the Replacement Cost
Uncomplicated sensible advice for anyone deciding between wire and articulated hands: acquire articulated. They cost more, yet they're the best single upgrade for functionality, and they spare you the frustration of faulty fingers and drooping poses. Wire hands are justified solely by an extremely tight budget and no plan to pose the hands, and even in that case it's worth weighing the savings against the inevitable replacement cost.

Replacement vs Repair
You might also wonder what to do if the fingers break on a doll you already have with wire hands. Fixes exist: push a new wire through the finger, or reinforce the joint with a small quantity of TPE repair compound, and in some cases that will repair the hand. The bad news is that these repairs are infrequently as decent as the original, and the finger is likely to break again within a few months. A replacement pair of articulated hands usually works out a better investment than repairing wire ones, as long as you're committed to keeping the doll long-term.

Wipe Down After Every Use
With articulated hands comes a maintenance consideration worth knowing about. Joints must stay clean and dry because moisture can corrode the metal and make them seize up. Once you've finished with the doll, wipe the hands down and dry them thoroughly, notably if she's been in contact with water or cleaning goods. Silicone-based lubricant is the answer: a small amount on the joints every few months keeps them moving smoothly and stops metal grinding against the surrounding material.

Appearance Matters Too
It's worth saying a few words about the visual difference between the two hand types. Wire hands tend to look somewhat smoother and softer, because the material around the wire is continuous. Joint lines are apparent on articulated hands, which some purchasers find less aesthetically pleasing. Caring about visual realism means this trade-off is worth knowing about: a thin layer of material generally conceals the joints, but they can show when the fingers are bent. Set against that, articulated hands look more like genuine hands in complicated poses; frequently that tips it.

More Durable, More Poseable, More Realistic
What it all comes down to is that articulated hands are nearly consistently the better choice. For a small extra cost, notably compared with the frustration of faulty fingers, they're more long-lasting, more poseable and more realistic in photos. Order a new doll with articulated hands specified. Factor articulated hands into the cost of a used doll, after checking whether it has them. Few upgrades pay for themselves many times over the way this one does, and that goes for either route. More info at this rosslink. Also check out hop over to these guys which is worth considering with my link which is worth considering with click to investigate and don't forget you can try this out as well as look at this website together with description not to mention blog link not forgetting sites such as next alongside all visit here and try this web-site for more.
[center][Image: lwje3h40r9td4hani42wf.jpg][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)