Dismiss this notice
Welcome to the new forums.
These will replace the old wanted sections and allow users to interact with each other and get files they need. Also it will allow for more discussion about codeplugs and hopefully help people get more out of this site. Please share any feedback with us via the contact links on the main page so we can keep improving this site for all.

NOTE: You will have to register with this system as the older user logins are not compatible with the new forums.


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The No-Nonsense Overview of Modern Sex Dolls- What to Expect
#1
[center][Image: nfaoxus406adxw2wnv657-1.jpg][/center]

[center]CLICK FOR THE BEST SEX DOLL BEGINNER GUIDE HERE[/center]

How To Use A Sex Doll: A Beginner's Guide To Getting It Right
So you've purchased your first doll, or you're on the point of doing so. Almost all new owners hit a moment of brief panic at certain point: 35 kg of silicone human out of the package in the living space, and you standing there wondering now what? That question is precisely what this guide is built for. Expect hands-on tips only: what you will really need in the initial week and what will save you from costly blunders in the initial month, with zero filler and no presumption that you already know. It is worth reading it twice: once before she arrives and once again after, as the second time through makes considerably more sense and lets you notice things you skipped over the first time.

Before you so much as open the box, certain jobs are worth doing, since after she's out of the package, moving her around gets considerably harder. "Somewhere in the bedroom" isn't a plan, so really decide: a wardrobe, a corner, or a storage container. Dolls are hefty and difficult to manage, and you will not wish to be improvising storage at 11 at night with an unclothed doll in your arms. Dye transfer is a real risk, so prepare the space she'll rest on, whether it is a bed, floor, or carry case, and verify it is clean and free of dark blankets, budget fabrics, and anything else that might shed colour. On carpet, lay something smooth underneath her. Any low bed can sink under her pressure in time, so verify it will not.

Before she arrives, get your kit ready:
1. Baby powder or cornstarch (for TPE dolls)
2. A hair dryer (for freeing up joints)
3. A spotless, pale-coloured cloth (for the material check)
4. A coarse-toothed wig comb (not a regular hairbrush)
5. Drying sticks (for the orifices)
6. Mineral oil designed for TPE (where relevant)
7. A soft make-up brush (for powdering)

It is all inexpensive, but every bit of it matters. Maybe twenty pounds covers the whole kit, and it is the distinction among a doll that stays in good condition and one that does not. Take your time opening the package instead of tearing into it, and if it is damaged, image it first, as that is your only cover for a guarantee claim. When it is open, carry out a quick inspection: inspect for splits in the armpits and groin, check that all fingers are undamaged, and verify the head sculpt matches the order you placed. Image any issue at once and tell the vendor before you do anything else, as a claim gets much harder once the doll has been used or repositioned.

Practically every new buyer is caught off guard by the next aspect: she will feel inflexible. Tight joints are entirely standard straight from the factory and do not mean something is broken. You have to ease the joints before you can pose her, and the technique is uncomplicated. Soften the TPE on each joint with a blow-dryer on a medium setting, not hot, after that slowly move each joint through its entire range of motion, working through the neck, shoulders, elbows, wrists, hips, knees, and ankles. If a joint will not move, warm it more, and never force anything. Give this a complete hour. It seems excessive, but it's what separates a doll you will really pose from one that ends up frozen in one pose as you gave up.

She's heavier than she looks, and this catches everyone. Till you're lifting her from a low position with the load concentrated in the wrong places, a 35 kg doll does not seem like much, so use good lifting technique, squatting down and lifting with your legs as opposed to your back. Where possible, bear hug her, grabbing under the armpits and keeping her close to your body, as the closer she is to your centre of balance, the less pressure you will feel. TPE and silicone both hold warmth fairly well, so she's warmer than you anticipate, and the first time you feel her attentively she'll feel less plastic than you were likely expecting. People talk about their dolls feeling alive mainly seeing as the cloth truly reacts to contact in a way that startles you, not seeing as of movement or AI.

You have to powder her on a regular basis, as TPE gets clammy with time, especially in high temperatures or after cleaning, and a light layer of cornstarch or baby powder applied with a soft cosmetic brush holds the exterior even and dust-free, so do this following every cleansing session. TPE sheds oil over time and needs replenishment, so oil her from time to time: a light coat of mineral oil made specifically for TPE dolls every couple of months maintains the fabric soft and prevents cracks, but don't go overboard, as an excess of oil makes the skin slippery and collects dust faster than dry skin does.

Cleansing isn't a one-off, it is a procedure. After use:
1. Take out any inserts and wash them separately
2. Wash the orifice areas in warm water and mild soap
3. Dry everything well with drying rods (between 15 and 20 minutes)
4. Powder the exterior with cornstarch or baby powder
5. Keep her the right way

This isn't optional, seeing as skip it and you will get mould forming inside her in a few weeks. Many people anticipate it to be quicker, but the entire procedure takes around 45 minutes, and that is the biggest reason veteran owners switch to swappable inserts, which cut that time approximately in half.

This is where newcomers make the worst error, seeing as they do not think about storage until it is an issue. Most old hands hang their dolls, using a heavy-duty hanging hook rated for at least 60 kg with a dedicated loop, which holds her in one position without putting stress on the joints. Storing her lying down works too, but be careful: flat surfaces are fine and uneven ones aren't, and leaving her on her back for a long time can flatten the buttocks or breasts, so vary the position from time to time. UV damages both TPE and silicone and bleaches wigs and coloured parts fast, so never leave her in direct sun, and keep her in a wardrobe or a covered carry case.

There's no shortage of internet opinions about owning dolls, and most of them are incorrect or overblown. She's not made of glass, so there's no need to be "careful" in the sense of treating her like porcelain: yes, she's bulky and her joints need maintenance, but she's also designed to be used. There's no need to be self-conscious: huge numbers of people own sex dolls, the industry has grown massively in the past decade, and the taboo has faded quickly, so owning one is a private choice and not something wrong with you.

Treating her like a person isn't a requirement either. Certain owners build detailed characters and personas for their dolls, which is great and aspect of the appeal for many people, but you do not have to, and if you just want a doll for physical pleasure and companionship without the roleplay, that's a totally valid way to use one. The only thing you truly need to get right is the hands-on side, seeing as everything else is individual taste and nobody else has a say on how you use something you own.

My process, for whatever it is worth, is basic, and every owner develops their own. Spend five minutes or so easing the joints prior to every session to verify nothing is rigid, as opposed to the whole hour from the first time, and powder following every clean without fail. Inspect the dye test on any new outfits even if you've used the same brand before, keep a backup wig within reach because synthetic hair takes longer to dry than you'd expect and you do not would like to be waiting, and store her with care every time. None of this is complex, it is just the process that holds your doll in top condition for many years on end on end as opposed to months.

The initial month teaches you the bulk of what you should know, and early slip-ups tend to be minor ones when you're careful. The things that go wrong later are the pricey ones, and they virtually always originate in something skipped in the opening weeks. Believe of a joint eased too aggressively, a cloth tested on the doll as opposed to a cloth, or a storage solution that appeared fine until the pressure bedded into it. Slow down at the start and the rest takes attention of itself.

You will also need to know what to do when something eventually goes wrong, seeing as it will. Maybe a tear in the armpit, a loose joint, or a mark that will not come out. The instinct is to panic and assume the doll is beyond saving, but virtually everything short of a snapped frame is fixable if you notice it early. TPE repair packs cost hardly anything and handle compact tears. Loose joints can be refitted or replaced. Marks will not come out, and that is why the fabric try is so important. Work out where the fixable issues are and stop fretting over the ones that aren't.

A doll is a big purchase that deserves respect, but "serious" doesn't mean "difficult." You will get years out of her if you ease the joints, powder her on a regular basis, and put away her correctly, but if you skip those things you'll be replacing her much sooner than you expected. After a tough first week, it becomes habit. More info at this A Candid Deep Dive Into Sex Dolls Right Now- The Real Talk a72815d as well as A Straight-Up Breakdown of Sex Dolls Today- What to Expect and The Full Rundown of Sex Dolls Today- Start Here. Also check out go to my blog for more.
[center][Image: lwje3h40r9td4hani42wf.jpg][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)