Dismiss this notice
Welcome to the new forums.
These will replace the old wanted sections and allow users to interact with each other and get files they need. Also it will allow for more discussion about codeplugs and hopefully help people get more out of this site. Please share any feedback with us via the contact links on the main page so we can keep improving this site for all.

NOTE: You will have to register with this system as the older user logins are not compatible with the new forums.


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The Real Breakdown of Sex Dolls Today- Before You Spend a Penny
#1
[center][Image: nfaoxus406adxw2wnv657-1.jpg][/center]

[center]VIEW BEST SEX DOLL HAND ADVICE HERE[/center]

Which Sex Doll Hands Are Best? Articulated Vs Wired Hands Compared
It's the detail nobody contemplates at the point of purchase: the hands, which turn into a persistent source of frustration within weeks. It never varies. The purchaser orders, the doll arrives looking great, and posing the hands reveals fingers that are stiff, floppy, or prone to breaking. You can avoid the single most typical first-time-owner complaint altogether by getting to grips with the two chief types of hands before you order.

Standard Wire Hands: Cheap and Common
You'll find standard wire hands more often, and they're also cheaper. Each finger has a thin metal wire through it, set in gentle TPE or silicone, so that they bend readily for posing. Natural-looking supple material surrounds the wire, which is thin enough to be pliable, so you can position the fingers into a variety of shapes. On a light doll there's no complication, and for light use of the hands they're perfectly adequate. Put them on a hefty doll and they're an issue.

Wire Fatigue Explained
Standard wire hands have one sizable complication: their wire has a limited lifespan. Once the wire has bent as many times as it can, it snaps, the finger goes floppy, and there's no simple way to fix it. Thin wire inside the finger breaks under constant pressure from a held pose, under the weight of the doll's arm, or even under ordinary handling over time. Buyers' reports range from fingers breaking within a few months to wires lasting a year or two before they fail. Failure is inevitable in either case, and it's a matter of when, not if.

Small Pivots, Multiple Bend Points
Upgrading means articulated hands. Individual stainless steel finger joints stand in for the single wire, each with a small pivot that lets the finger bend at multiple points. Much stronger than wire, this setup holds a pose without putting strain on the material around the joints. Pricier by usually fifty to a hundred pounds, depending on the producer, articulated hands are nevertheless worth the upgrade for almost every customer. The gap in durability and poseability is immense.

Fingers That Don't Droop
One advantage, the first, is that articulated hands hold poses. A wire hand tends to sag over time because the wire can't preserve tension, but an articulated hand stays in the position you put it because each joint is designed to hold. As a result she can grip objects, rest a hand on her hip, or hold a photography pose with no drooping fingers. For purchasers who photograph their dolls, this is a vast upside, because the hands are one of the most expressive parts of a pose.

No Wire Fatigue in Stainless Steel Joints
A second advantage is durability. Articulated hands skip the wire fatigue complication thanks to stainless steel joints and pivots designed to last. Over time the material around the joints can still wear, though the joints are much more hard-wearing than wire and the risk of a finger snapping is dramatically lower. Even more crucial on a weighty doll: wire hands on a 45kg doll are constantly strained and will break faster than on a lighter doll.

Spot the Difference if You Know What to Look For
The third benefit is realism, as articulated hands look better in poses. Wire hands tend to have a marginally rubbery look when bent, because the wire doesn't support the material properly. More defined fingers, less squashed into position, are the result of articulated hands holding the finger shape more crisply. It's in photographs that you notice it most; wire hand versus articulated hand is an apparent difference if you know what to look for.

Benefit Four: The Doll Feels More Complete
Articulated hands' fourth upside is that the doll feels more complete. A doll with articulated hands can gesture, point, hold and grip in ways a wire-handed doll simply can't, the hands being one of the most expressive parts of the body. Dynamic compositions, props and held objects become possible, which they wouldn't be otherwise, and posing gets an entirely new dimension. Photographers and roleplay enthusiasts get a substantial upside from this.

Why the Upgrade Usually Pays for Itself
The first disadvantage of articulated hands is the cost. If every pound counts, the extra fifty to a hundred pounds might take the total out of your range. Floppy fingers are frustrating and a non-working wire hand costs to replace; generally both are worse than the upfront cost, which is why the upgrade is practically always worth it in the long run.

Adjusting From Wire to Articulated
The second downside is that articulated hands can be a little stiffer than wire hands. They resist movement more than wire does, because the joints are designed to hold a pose. You need to put a bit more effort into positioning the fingers, but it's a decent thing for posing that the hand stays where you put it. Annoying for some buyers, notably if they're used to wire hands that bend easily. Most customers adjust within a few days, so it's a minor trade-off.

Handling Articulated Hands Carefully
Third, articulated hands can be slightly more delicate than wire hands, though in a different way. At times the connections between the joints and the material come loose, and if a finger gets wrenched out of position the joint can pop out and need reinserting, strong as the joints are. Before you buy, know that this, while less common than wire breakage, does take place. Handle with care. Support the hand properly when moving it, and leave fingers alone if they don't want to go where you're pushing them.

Proportions Vary Between Manufacturers
A little larger size than wire hands is the fourth downside of articulated hands. Space is taken up by the additional joints, which can make the fingers look a bit chunkier. If you're purchasing a petite doll with fragile proportions, articulated hands might look somewhat out of place, as the difference, normally slight and unnoticed by most customers, can be noticeable on smaller dolls. Proportional scaling of the articulated hands varies by manufacturer, with some doing it better than others, so ask the vendor whether a particular doll's are scaled proportionally.

The Single Best Functionality Upgrade
For customers who are deciding between wire and articulated hands, the useful advice is simple: acquire articulated. They're more costly, but they're the single best upgrade you can make to the doll's functionality, and they'll save you from the frustration of broken fingers and drooping poses. Buy wire hands only if you're on an exceptionally tight budget and don't plan to pose the hands at all, and even then consider whether the savings are worth the inevitable replacement cost.

Replacement vs Repair
Also worth covering is what to do if you already have a wire-handed doll and the fingers break. Now and then it can be saved. Pushing a new wire through the finger, or utilising a small quantity of TPE repair compound to reinforce the joint, will repair wire hands in some cases. Now for the catch. A repair is seldom a patch on the original, so expect that finger to give out again inside a few months. If you're committed to keeping the doll long-term, purchasing a replacement pair of articulated hands is usually a better investment than attempting to repair wire ones.

Keep the Joints Clean and Dry
For buyers who are buying a doll with articulated hands, there's a maintenance consideration worth knowing about. The joints need to be kept clean and dry, because moisture can cause the metal to corrode and the joints to seize up. Contact with water or cleaning items calls for additional care, but in any case wipe the hands down after every use and dry them thoroughly. Grinding of metal against the surrounding material is avoided, and the joints move smoothly, when a small quantity of silicone-based lubricant goes on every few months.

Joint Lines When Fingers Bend
Visually, the two hand types differ, and that deserves a few words. The material around the wire is ongoing, so wire hands tend to look slightly smoother and softer. Some customers find the noticeable joint lines on articulated hands less aesthetically pleasing. The joints can be noticeable when the fingers are bent even though a thin layer of material normally conceals them, so if you care about visual realism, be aware of this trade-off. Weigh that against the realism: more like real hands in complicated poses, and the trade-off frequently comes out in their favour.

Factor Hand Type Into Used Doll Prices
Articulated hands are nearly always the better choice, and that's the bottom line. Compared with the frustration of dealing with faulty fingers, the additional cost is small, and you get more tough, more poseable, more photo-realistic hands. On a new purchase, specify articulated hands in the order. For a used doll, check whether it has articulated hands, and factor that into the cost. Countless times over, the upgrade pays for itself; that's true either way. More info at this An Honest Breakdown of Modern Sex Dolls- The Honest Breakdown a2e158a alongside all The Only Look at Sex Dolls Today- No Hype Just Facts and Your Ultimate Lowdown on Sex Dolls- No Hype Just Facts. Also check out read more for more.
[center][Image: lwje3h40r9td4hani42wf.jpg][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)